PacsOne Server

Would it be possible to add dicom print options to print overlays like Patient Name, Patient ID, Exam Date and Patient Date of Birth?

--John

Patient Name, Patient ID, Exam Date, etc. can be printed as annotation boxes instead of overlay boxes (burned 1-bit pixel data), but neither the annotation box nor the image overlay box is required to be supported by the printer.

1. Which printer are you using?

2. Do you have the Dicom Conformance Statement of the printer (which should manifest whether it supports the annotation box or the image overlay box SOP class, or both)?

Hi,

The Film Printer is an Agfa Drystar 5300 (DS5300). I found the following in the Dicom Conformance Statement. I could forward the complete pdf file if necessary.

SOP Classes SCU/SCP
Verification SOP Class No/Yes
Print Management
Basic Grayscale Print Management Meta SOP Class No/Yes
Basic Color Print Management Meta SOP Class No/Yes
Basic Annotation SOP Class No/Yes
Print Job SOP Class No/Yes
Presentation LUT SOP Class No/Yes
Print Queue Management SOP Class No/Yes

SOP Class Name SOP Class UID SCU/SCP
Basic Annotation Box SOP Class 1.2.840.10008.5.1.1.15 No/Yes

Thanks! --John

According to the information you posted, this printer supports the annotation box sop class but not the overlay box class, so you'd not be able to print text boxes using the burned/overlay data but you can use the annotation boxes to fit the text strings, e.g., Patient Name, Exam Date, etc.

We'd need the full conformance statement of this printer since the annotation formats it offers are most likely proprietary (that's why the annotation box sop class is optional), in order to implement these annotation formats for the next version of PacsOne Server. We'd probably need some of your time as well to test the implementation because we don't have access to such a printer ourselves. If you're ok with this, please send the conformance statement to mailto:pacsone@pacsone.net.

Can we change the font size bigger when printed out at annotation display box 1 and box 2 ?

Thanks.

Don.

Can we change the font size bigger when printed out at annotation display box 1 and box 2 ?

Thanks.

Don.

The font size of the annotation display box should be configurable from the Dicom printer, as PacsOne can set the annotation text and position, but not the font size. Check the user manual or technical support for your Dicom printer, and see how to set the font size for the annotation display boxes.