I HAVE INSTALLED PACSONE SERVER.WHEN I TRY TO CONFIGURE IT WITH THE KODAK VITA CR THERE IS NO COMMUNICATION BETWEEI THE CR AND PACSONE SERVER.tHE FOLLOWING ERROR APPEARS;
fsockopen() failed: No connection could be made because the target machine actively refused it. (10061).wHAT5 IAM NOT DOING RIGHT?
Not Echoing the AE
Make sure you've configured the correct hostname/IP address and TCP port for this Kodak CR remote AE, and also make sure there is no firewall blocking inbound packets to the configured IP address/TCP port.
You can also verify the connection to the configured IP address/TCP port independently using any 3rd-party terminal emulation program such as Telnet, by opening a connection to the configured IP address/TCP port. For example:
If Telnet cannot establish a connection to the configured IP address/TCP port, then neither will PacsOne Server.
You can also verify the connection to the configured IP address/TCP port independently using any 3rd-party terminal emulation program such as Telnet, by opening a connection to the configured IP address/TCP port. For example:
Code: Select all
C:\>telnet 192.168.0.100 104