Remote dicom error

Bushranger · Post by **Bushranger** » Tue Nov 14, 2006 2:46 pm

with the netstat command, there is no listening to the port 1234.
Could it be a port-prob, used by another prog? How could I check this? Or is there another possibility to change the port?

Post by **pacsone** » Tue Nov 14, 2006 3:54 pm

You should check if you have a valid license (license.dat) under the directory where PacsOne is installed. If so, you can send it to mailto:pacsone@pacsone.net and have it checked for you.

Bushranger · Post by **Bushranger** » Wed Nov 15, 2006 9:17 pm

there seems to be an error in the dicom.php in line 2367, cause I got a message pointig at this

C:\Programme\PacsOne\php\dicom.php on line 2367

Post by **pacsone** » Thu Nov 16, 2006 1:09 am

What's the error message?

Bushranger · Post by **Bushranger** » Mon Nov 20, 2006 12:16 pm

fsockopen() failed: Ein Verbindungsversuch ist fehlgeschlagen, da die Gegenstelle nach einer bestimmten Zeitspanne nicht ordnungsgemäß reagiert hat, oder die hergestellte Verbindung war fehlerhaft, da der verbundene Host nicht reagiert hat. (10060)
That means that the connection failed, cause the counterpart is not actiing in a certain time, or the established connection has mistakes, cause the connected localhost is not answering.
So I don t know what to do.
A knew installtion showed up with the same probs, and that on ifferent machines.

Post by **pacsone** » Mon Nov 20, 2006 1:15 pm

The fsockopen() error means the host where PacsOne is installed could not establish a TCP connection to the remote port number at the configured IP address for that remote AE you're trying to ping, so make sure you've configured the correct port number and IP address for that remote AE, or there's no firewall blocking incoming packets from the PacsOne host to that port/IP address.

Bushranger · Post by **Bushranger** » Mon Nov 20, 2006 4:08 pm

the remote AE title in that case is the ae-title of pacsone itself.
I am unable to establish a connection to the port 1234 on all machines, running with 2000 andw2003 as OS. A firewall is not running, so I ve no idea what prog is using the port 1234.
checking the ports with netstat , port 1234 is not established or listening.
I really don t know what to check anymore, allthouh the installation of pacsone seems easy to me to realize, but the devil is in the detail.

Post by **pacsone** » Tue Nov 21, 2006 3:25 am

Bushranger wrote: checking the ports with netstat , port 1234 is not established or listening.

This usually means your license is either missing or invalid. If it is present (license.dat under the directory where PacsOne is installed), you can send it to mailto:pacsone@pacsone.net and we'll check it out.

Bushranger · Post by **Bushranger** » Fri Nov 24, 2006 10:02 am

the license.dat file seems to be missing. What to do now?

Post by **pacsone** » Fri Nov 24, 2006 1:43 pm

You can send the output of the following command run from a shell on your server:

1. If you're running Windows, type:

C:\>ipconfig /all

2. If you're running Linux, type:

$ uname -a;/sbin/ifconfig

Bushranger · Post by **Bushranger** » Sat Nov 25, 2006 12:22 pm

C:\Dokumente und Einstellungen\Administrator>netstat -aon -p tcp

Aktive Verbindungen

Proto Lokale Adresse Remoteadresse Status PID
TCP 0.0.0.0:23 0.0.0.0:0 ABHÖREN 2304
TCP 0.0.0.0:80 0.0.0.0:0 ABHÖREN 1616
TCP 0.0.0.0:135 0.0.0.0:0 ABHÖREN 952
TCP 0.0.0.0:445 0.0.0.0:0 ABHÖREN 4
TCP 0.0.0.0:1025 0.0.0.0:0 ABHÖREN 668
TCP 0.0.0.0:1433 0.0.0.0:0 ABHÖREN 1696
TCP 0.0.0.0:1723 0.0.0.0:0 ABHÖREN 4
TCP 0.0.0.0:3306 0.0.0.0:0 ABHÖREN 2116
TCP 0.0.0.0:3389 0.0.0.0:0 ABHÖREN 2632
TCP 0.0.0.0:5678 0.0.0.0:0 ABHÖREN 2520
TCP 127.0.0.1:1034 127.0.0.1:1035 HERGESTELLT 3264
TCP 127.0.0.1:1035 127.0.0.1:1034 HERGESTELLT 3264
TCP 127.0.0.1:1038 127.0.0.1:1039 HERGESTELLT 3264
TCP 127.0.0.1:1039 127.0.0.1:1038 HERGESTELLT 3264
TCP 192.168.178.49:139 0.0.0.0:0 ABHÖREN 4
TCP 192.168.178.49:1042 83.138.190.203:80 HERGESTELLT 3264

ths ist the output command
for it s a german version Abören means listening and Hergestellt established

Post by **pacsone** » Sun Nov 26, 2006 1:48 am

Did you configure PacsOne to listen to the default port number of 1234?

If so, then PacsOne was not running as port 1234 was not being listened from the output of the netstat command you posted.

Bushranger · Post by **Bushranger** » Sun Nov 26, 2006 11:49 am

I configuered pacsone to rum from port 1234, it s listed in the server configuration. And I installed be now the newest version 4.13.
So I really don t know whre my mistakes are.

Post by **pacsone** » Mon Nov 27, 2006 12:58 am

Bushranger wrote:the license.dat file seems to be missing. What to do now?

It seems that you've already found the reason why PacsOne Server was not running, as your trial license seems to be missing. If this is the case, please follow the message a few posts back to get a new trial license.

Bushranger · Post by **Bushranger** » Sun Dec 03, 2006 8:22 am

Well, finanally I got it running.
I made a complete new installation with w2k and I downloaded the last version 4.1.3 and wamp 1.6.6 and then it was running.
It was as you suggested, the licence was missing in the installations before, now its there.
May be it was a prob with my downloaded 4.1.2, cause the installation manual is really good in describing the installation.
Probably you should add the installation with wamp, its the matter of choice to my mind and allmost idiot proof and only needs the addition line for imagick.
Thanks for your help.